Cisco 010-151 Supporting Cisco Data Center Networking Devices Online Training
Cisco 010-151 Online Training
The questions for 010-151 were last updated at Oct 23,2025.
- Exam Code: 010-151
- Exam Name: Supporting Cisco Data Center Networking Devices
- Certification Provider: Cisco
- Latest update: Oct 23,2025
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A . Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
- B . Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- C . Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- D . Servers Tab > Chassis > Server 3 General tab
- E . Status Tab > Chassis > Chassis 1 > Servers > Server 3
- F . Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
If the Overall Status for a Cisco UCS B-Series Blade Server indicates a failure in the Cisco UCS Manager, such as discovery-failed, which statement is true?
- A . The server shuts down.
- B . The server automatically reboots reboot in 3 minutes.
- C . The endpoints on that server cannot be upgraded.
- D . The server is online, but the administrator cannot assign a service profile to that blade.
Which action should the administrator take before physically removing a blade server for maintenance or replacement?
- A . Force the server to shut down.
- B . Disassociate the service profile.
- C . Decommission the server.
- D . Perform a graceful shutdown of the server.
Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.)
- A . Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.
- B . Power status LED. Green indicates that the server is in main power mode and can be safely powered off.
- C . Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED.
- D . Disconnect the power cords from the power supplies in your server to completely power off the server.
- E . Only an emergency shutdown can be performed using the power button on the server front panel.
- F . The Cisco UCS C-Series Rack-Mount Server has only one power mode.
Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)
- A . Fabric Extender
- B . Power supply
- C . Heat sink
- D . SAS Hard Drive
- E . 2x8GB Kit DIMMs
- F . Mezzanine card
Which five things should the administrator verify after performing maintenance or replacing a blade server? (Choose five.)
- A . blade server status
- B . hard drive status
- C . host OS boot status
- D . CPU status
- E . mezzanine card status
- F . memory DIMM status
- G . fan and power status
Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)
- A . In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
- B . Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
- C . In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
- D . If the memory in a server is not fully populated, you can install DIMMs in any open slot.
Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)
- A . Cisco DB-9-to-RJ-45 console cable
- B . laptop
- C . monitor
- D . keyboard
- E . KVM dongle
- F . USB serial adapter
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A . Verify the power source to the equipment.
- B . Check for loose HDD cables.
- C . Reseat the DIMMs, CPU, and PCI cards.
- D . Verify that power supplies are receiving power.
- E . Reseat the mezzanine card connector.
- F . Check the CPU sockets for bent pins.
- G . Check the Cisco IMC for fan faults.
Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)
- A . Fabric Interconnect firmware
- B . LAN on Motherboard
- C . Cisco UCS Manager
- D . CIMC
- E . System BIOS
Latest 010-151 Dumps Valid Version with 136 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
