An engineer is configuring a Jabber client installation switch for a phone system using Cisco UCM as the registration server, with a softphone control address of 10.0.1.200. and configuration files received from 10.11.20.201 after all previous configurations are cleared

DRAG DROP

An engineer is configuring a Jabber client installation switch for a phone system using Cisco UCM as the registration server, with a softphone control address of 10.0.1.200. and configuration files received from 10.11.20.201 after all previous configurations are cleared.

Drag and drop the snippets from the bottom of the image onto the blanks in the image to complete this configuration. Not all options are used.

View Answer

Answer:

Explanation:

To configure the Jabber client installation switch for the described scenario:

CLEAR= parameter is used to clear previous configurations.

PRODUCT_MODE= parameter determines how the Jabber client functions.

AUTHENTICATOR= parameter sets the registration server.

TFTP= parameter sets the server from which configuration files are received.

CTI= parameter sets the softphone control address.

Given the information, the configuration would look like this:

For CLEAR=, use Clear to clear all previous configurations.

For PRODUCT_MODE=, use Jabber since we want the client to function as Jabber.

For AUTHENTICATOR=, use Registration to set the registration server.

For TFTP=, use 10.11.20.201 as this is where configuration files are received.

For CTI=, use 10.0.1.200 for the softphone control address.